VESDA LaserPLUS™
The Detector Assembly
The detector assembly contains the laser
detection chamber, high efficiency aspirator, monitored
filter cartridge, control electronics, and relay interface. The detector assembly can be
used as a “distributed” system, with the display, programmer, and VESDAnet
socket modules mounted in a remote location. Alternatively, the detector assembly can be
configured as a “self-contained” system by replacing the detector’s blank
panels with the display and/or programming modules.
Product
Configurations
All detectors come with a head termination card (HTC) with 7 configurable relays, a
configurable General Purpose Input (GPI) and VESDAnet socket.
Just some of the configurations
possible:
More
Info >
Brochure
| Data Sheets
(You must have Adobe Acrobat Reader to view Brochures and/or Data Sheets)
Download FREE
VESDA LaserSCANNER™
VESDA LaserSCANNER is similar to VESDA LaserPLUS, however it allows the
system to distinguish and identify
the pipe carrying smoke, while sampling multiple sectors. The detection of smoke results
in the system locating the sector in Alert. The VESDA LaserSCANNER detector will continue
to sample from all sectors to monitor the fire growth and maintain full protection.
Specific display modules are available for the VESDA LaserSCANNER
configuration. LaserSCANNER's modular design allows multiple product configurations to
more closely meet customer requirements.
Product Configurations
All detectors come with a head termination card (HTC) with either 7 or 12 configurable
relays, a configurable General Purpose Input (GPI) and VESDAnet socket.
Just some
of the configurations possible:
- VLS-300, a
standard blank LaserSCANNER detector (12 Relays)
- VLS-700, a
LaserSCANNER detector with Fire and OK LEDs (12 Relays)
- VLS-304, a
LaserSCANNER detector with a LaserSCANNER Display module (12 Relays)
- VLS-314, a
LaserSCANNER detector with a Programmer and LaserSCANNER Display module (12 Relays)
More
Info >
Brochure
| Data Sheets
(You must have Adobe Acrobat Reader to view Brochures and/or Data Sheets)
Download FREE
THE
VESDA LaserCOMPACT™
 The newest product in the VESDA product range. Specifically designed for the
protection of smaller environments, LaserCOMPACT allows VESDA performance to be cost
effectively installed in areas not previously considered. The LaserCOMPACT supports 5
LEDs: Fire, Pre-Alarm/Alert, Fault, OK, Reset/Isolate. It has 3 relays on the termination
card plus VESDAnet compatibility (VLC-505 version only).
Possible Configurations:
- VLC-500
(RO), Relays interfacing only
- VLC-505
(VN), Relays and VESDAnet interfacing
More
Info >
Brochure
| Data Sheets
(You must have Adobe Acrobat Reader to view
Brochures and/or Data Sheets)
Download FREE
Headquarters: Altamonte
Spgs., FL
920 Britt Court, Suite 248
Altamonte Springs, FL 32701
Tel.: (407) 831-3313
Fax: (407) 831-4789
E-mail: CustomerService@CallPSI.com
© 2004 Protective Systems, Inc.
|
